Education // an open learning environment

From light to other worlds.

Explore the physics behind a spectrum, follow the evidence to a stellar abundance, and learn what it can tell us about planets.

Source-checked draft · independent scientific and accessibility review pending

Light

Read wavelength, frequency and photon energy before reading a spectrum.

What you will learn

  • Connect wavelength to photon energy.
  • Distinguish a Doppler shift from spectral resolution.
Working experiment

Tune a photon

Drag the spectrum or move the wavelength slider. Shorter wavelength means higher frequency and photon energy.

Exact vacuum unit conversions · approximate screen colors

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Model, sources & teacher notes

E = hc/λ; ν = c/λ. The color strip is original illustrative RGB interpolation, not calibrated human color perception; visible limits vary. J is energy, Hz is frequency.

Teacher prompt: Predict the change in E when wavelength doubles. Compare 400 nm with 780 nm and explain the inverse relationship.

NIST CODATA 2022 constants

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Working experiment

Prism or diffraction grating?

Compare two different ways to spread wavelengths. Each ray is colored by the same approximate color scale.

Analytic optics · schematic ray layout

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Model, sources & teacher notes

Prism: SCHOTT N-BK7 Sellmeier n(λ), minimum deviation δ = 2 asin(n sin(A/2)) − A. Each wavelength is evaluated at its own minimum-deviation incidence; the illustration is not a common-incidence ray trace. Grating: normal incidence in vacuum, d sin θ = mλ. An order with |mλ/d| > 1 does not propagate. Prism refraction is not diffraction. Angles and angular dispersion are numeric; ray positions are schematic.

Teacher prompt: Compare red and blue: which has the larger prism deviation? Which has the larger grating angle in order +1? What happens in order zero or when an order is forbidden?

SCHOTT N-BK7 datasheet, 2023-12-01, dispersion coefficients · OpenStax University Physics 3 §4.4: diffraction gratings

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Working experiment

Separate two nearby lines

The cyan curve is a noise-free teaching profile; orange points illustrate detector sampling and seeded Gaussian noise.

Gaussian line-spread approximation · not a measured HARPS profile

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Model, sources & teacher notes

At 550 nm, instrumental FWHM = λ/R. Intrinsic Gaussian sigma is 0.0005 nm, convolved analytically with the Gaussian instrument profile. R, sampling and noise are separate. ESO overview gives nominal HARPS R=115,000; manual 3.3.12 lists measured R=120,000 and 4.1 pixels/FWHM. The two presets retain this distinction. Real HARPS line-spread functions are not universally Gaussian. Distinguishability depends on line shape, contrast, sampling, SNR and inference method; there is no universal hard threshold.

Teacher prompt: Hold R fixed and reduce SNR, then change sampling alone. Which properties of the noise-free line stay unchanged?

ESO HARPS overview: R=115,000, 378–691 nm · ESO HARPS Pipeline Manual 3.3.12 §4.3: sampling, 4.1 px/FWHM · Zhao et al. 2020: measured HARPS line profile

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Working experiment

Move a spectrum toward or away

Cyan: stationary reference. Orange: shifted copies of the same three hypothetical absorption lines.

Longitudinal special-relativistic Doppler shift

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Model, sources & teacher notes

λobs/λrest = sqrt((1+β)/(1−β)), β=v/c. The approximation Δλ/λ ≈ v/c applies for |v| ≪ c; compare its error in the readout. Hypothetical reference lines at 499.7, 500.0 and 500.3 nm are not element identifications. Only longitudinal motion is modeled.

Teacher prompt: Set v to equal positive and negative values. Explain the sign, then follow the link to stellar reflex motion in the RV simulator.

NIST CODATA 2022 constants · NASA Exoplanet Archive: predicted observables and RV amplitude

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Start here

A spectrum separates light by wavelength. Ultraviolet photons carry more energy than visible photons; infrared photons carry less. Wavelength is a length, frequency counts oscillations per second, and photon energy is the energy exchanged in one interaction.

Shorter wavelength → higher photon energy

UV → visible → IR

An arrow orders wavelength; band edges are conventions.
Go deeper · the mathematics

In vacuum, c = λν and E = hν = hc/λ. At small radial velocities, Δλ/λ ≈ v/c; positive recession shifts a line to longer wavelength. Resolving power R = λ/Δλ describes the smallest nearby features an instrument can separate under a stated resolution convention.

Advanced · assumptions and scientific limits

Air and vacuum wavelengths differ because light propagates differently in air. Compare quantities in a declared medium and velocity frame. Instrumental resolution, pixel sampling and measurement precision are separate. UV, visible and IR band boundaries are conventions; this site uses <400, 400–780 and ≥780 nm for navigation.

Worked example / activity

A hypothetical 500 nm vacuum photon has frequency about 6.00 × 10¹⁴ Hz and energy 2.48 eV. At R = 50,000, a 500 nm resolution element is about 0.010 nm. These are unit-conversion examples, not observations.

Common misconception

A redshift moves line positions; it does not identify an element by itself. Greater resolution does not automatically mean smaller abundance uncertainty.

Sources and review record

Last source check: . Independent scientific reviewer: pending. Accessibility reviewer: pending. This date records source checking, not independent approval.

Next: Atomic Physics & Spectral Lines → · Back to modules ↑

Atomic Physics & Spectral Lines

Explore discrete states and the photons exchanged between them.

What you will learn

  • Explain absorption and emission with energy conservation.
  • Locate one transition on a spectrum.

Atomic transition explorer · hydrogen & sodium

Choose a fine-structure component. Read the states, photon and spectral line together.

Static reference view: Balmer α emission. Interactive controls require JavaScript and the local reference file.

Hydrogen Balmer α emissionAn electron drops from the upper state to the lower state, emitting one photon. Vertical spacing is schematic. 3p ²P°₃/₂ · 97492.3196 cm⁻¹2s ²S₁/₂ · 82258.9544 cm⁻¹ Photon1.889 eVEnergy ↑ · schematic spacing, not to scale
Emission: 3p ²P°₃/₂ → 2s ²S₁/₂. A photon carries the energy difference. Electron markers show states, not orbits.

Photon color is schematic.

Static visible-spectrum referenceBalmer α: 656.45 nm vacuum, in the red visible band.
Line positions use vacuum wavelength. The top strip locates colors; the lower strip compares emission on darkness with absorption in a continuum. Width and brightness are illustrative.
Vacuum wavelength
656.45 nm
Photon energy
1.889 eV
Band
Visible
Linked spectral lineIllustrative emission peak at the selected transition. Width and height are arbitrary.Relative signal (schematic)656.45 nm · vacuum
Linked line position; shape, width and intensity are illustrative. UV photons have no visible color.

Ready: emission starts in the upper state.

Reference data, assumptions and teacher notes

vacuum Ritz estimate from rounded NIST level differences; individual fine-structure components, not blended line centroids. No uncertainty inferred from printed decimals. Educational display rounded to 0.01 nm and 0.001 eV; not for precision calibration.

  • Schematic level spacing, electron marker and photon path are not spatial orbit trajectories or physical timescales.
  • Allowed electric-dipole examples: parity changes, Δl = ±1 and ΔJ = 0, ±1 (0 → 0 excluded).
  • Illustrative spectrum shape, line width and height do not predict intensity, equivalent width or stellar populations.

Classroom: predict the direction, play once, then reverse the mode. Does changing direction change the photon energy? Why does Balmer β have a shorter wavelength? Use the CSV to record the level identity and source.

Stellar absorption is a radiative-transfer phenomenon involving opacity, emission, scattering and populations in an atmosphere; this isolated transition does not simulate a star.

Sources: NIST hydrogen levels, NIST line-component context, SI constants. Versioned hydrogen reference data · Sodium levels and canonical metadata snapshot · NIST Na I levels. The sodium D doublet connects the same lower state to two fine-structure upper states. NIST Handbook sodium line wavelengths are air values; this explorer derives vacuum Ritz estimates from the energies.

Start here

An atom has discrete quantum states. Absorption can raise an electron to a higher-energy state; emission accompanies a drop to a lower-energy state. The photon energy matches the difference. The explorer below connects these two descriptions without depicting electrons as tiny planets.

Higher energy state

↓ emission · ↑ absorption

Photon energy equals the gap; spacing is schematic.
Go deeper · the mathematics

Eγ = Eupper − Elower. When level energies are tabulated as wavenumbers in cm⁻¹, λvac(nm) = 10⁷ / Δσ. The same energy gap applies in either direction. Oscillator strength f describes a transition probability scale; it is not an elemental abundance.

Advanced · assumptions and scientific limits

Fine structure splits a named hydrogen feature into components. Electric-dipole selection rules restrict which states connect; not every pair of levels is allowed. Natural, thermal, pressure and turbulent broadening shape lines, while nearby transitions can blend. This explorer selects individual allowed components and does not calculate their intensities.

Worked example / activity

Select Balmer α and compare emission with absorption. The photon energy and wavelength stay the same while the direction reverses. Then choose Balmer β: its larger level gap requires a higher-energy, shorter-wavelength photon.

Common misconception

A stellar absorption line is not explained by one atom simply removing a color. Emergent intensity depends on opacity, emission, scattering, populations and the temperature structure along the path.

Sources and review record

Last source check: . Independent scientific reviewer: pending. Accessibility reviewer: pending. This date records source checking, not independent approval.

Next: Stellar Spectroscopy → · Back to modules ↑

Stellar Spectroscopy

Connect a stellar atmosphere to its continuum and Fraunhofer lines.

What you will learn

  • Separate atmospheric parameters from instrumental effects.
  • Explain why line strength alone cannot determine abundance.
Working experiment

Stellar Spectroscopy Simulator

Compare a weak and a saturated synthetic teaching line under the same parameters. Dashed lines retain the reference atmosphere for comparison.

Schematic LTE absorbing slab · not a validated stellar atmosphere grid

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Model, sources & teacher notes

This is a generic Fe-like atom (56 u, ionization 7.9 eV, excitation 2.5 eV), not an identified observed transition. A single LTE absorbing screen uses F=exp(−τ); opacity scales with 10^[M/H] and Saha–Boltzmann populations. T is set equal to Teff. Electron density ne=10¹⁹ × 10^(log g−4.44) × 5772/T m⁻³ is an explicit schematic pressure proxy, not a calibrated atmosphere. Doppler b²=2kT/m+ξ²; the area-normalized opacity is broadened before transfer. Only instrumental broadening is a subsequent convolution. No line emission, damping, real atmosphere, NLTE or 3D prediction. Slider bounds define the teaching domain, not an interpolation grid.

Teacher prompt: Hold abundance fixed, increase ξ and compare weak/saturated EW. Change R alone: profiles change while integrated EW is conserved if the window contains the full line. Explore gravity–metallicity and temperature degeneracies; different parameters can give similar line strengths.

Tatum, Stellar Atmospheres, ch.8: Boltzmann and Saha equations · Tatum, Stellar Atmospheres, ch.11: curve of growth · NIST CODATA 2022 constants

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Start here

The continuum is a useful reference level beneath the forest of stellar spectral lines. Fraunhofer absorption lines reveal atomic and molecular interactions in the Sun’s atmosphere. A line can change when temperature, gravity, chemistry or the observing instrument changes.

Continuum from deeper layers

Atmosphere → emergent spectrum

Opacity and emission both matter along the light path.
Go deeper · the mathematics

Radiative transfer balances extinction and emission: dIν/ds = −ανIν + jν. Optical depth measures accumulated extinction. Effective temperature describes total emergent flux via F = σSB Teff⁴; it is not the temperature at every depth.

Advanced · assumptions and scientific limits

LTE uses local temperature and density relations for populations and source functions under appropriate assumptions. NLTE solves populations coupled to radiation and collisions. One-dimensional atmospheres, mean-3D structures, independent 1.5D columns and fully coupled 3D transfer have different assumptions. Microturbulence changes line opacity and saturation; it is not merely a final convolution. Thermal, rotational and instrumental broadening also have distinct effects.

Worked example / activity

Hold abundance fixed while comparing two schematic lines: an initially weak line responds differently to microturbulent broadening than a saturated line. A quantitative prediction requires a validated atmosphere, line data and transfer model; no such stellar grid is supplied here.

Common misconception

A deeper line does not necessarily mean more of an element. Temperature, ionization, blends, continuum placement and resolution can produce similar changes. An NLTE label alone does not establish applicability.

Sources and review record

Last source check: . Independent scientific reviewer: pending. Accessibility reviewer: pending. This date records source checking, not independent approval.

Next: Elemental Abundances → · Back to modules ↑

Elemental Abundances

Follow a calibrated spectrum through line measurement to a checked result.

What you will learn

  • Trace the major steps from detector to abundance.
  • Identify correlated as well as random uncertainties.
Working experiment

Measure the missing light

The shaded area is the signed integrated difference between the adopted continuum and normalized flux within the selected window.

Analytic line profile · numerical area integral

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Model, sources & teacher notes

Wλ = ∫[1−Fλ/Fc]dλ; 1 Å = 1000 mÅ. The center is a hypothetical 5000 Å (500 nm) line. Depth and width are independent synthetic teaching inputs. Gaussian full EW = depth × sigma × sqrt(2π); FWHM = 2 sqrt(2 ln 2) sigma and is not EW. A finite window can lose area. Continuum errors can add or subtract area, including a signed negative result. The Lorentzian width control is HWHM, not sigma.

Teacher prompt: Change depth and width separately. Then keep the physical line fixed and offset the continuum: is the inferred EW unbiased? Compare the area result with FWHM.

Tatum, Stellar Atmospheres, ch.11: curve of growth

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Working experiment

From equivalent width to abundance — conditionally

Move along a synthetic curve of growth. Compare two Doppler widths at the same abundance and inspect a line profile.

Fixed absorbing-screen curve of growth · synthetic differential abundance

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

EW/curve-of-growth uses integrated area; profile fitting and spectral synthesis compare wavelength-dependent flux and blends. These are methods, not engines. LTE/NLTE concerns populations and radiation; 1D/mean-3D/full-3D concerns structure/transfer. Codex registry distinguishes these axes; named engines have line- and model-dependent applicability, not blanket certification.

Compare documented Codex measurement methods

Model, sources & teacher notes

F(v)=exp[−A φ(v)] with unit-area Gaussian φ, A=5×10^ΔA km/s and sigma=b/√2. W is integrated and converted at a hypothetical 500 nm line. Inversion uses the same fixed transition strength and atmosphere proxy; it returns only a synthetic differential abundance, not a calibrated A(X) or Codex result. This Gaussian-opacity model shows linear and saturation regimes, not the damping-wing branch. Increasing b can increase saturated EW at unchanged abundance. Instrument convolution conserves full EW and is distinct from opacity broadening.

Teacher prompt: Compare b=2 and b=6 at ΔA=−2 and +1. An EW-to-abundance conversion requires the transition, populations, broadening and transfer assumptions to be held fixed.

Tatum, Stellar Atmospheres, ch.11: curve of growth

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Start here

Start with calibrated spectra and verified source identity, wavelength scale and velocity frame. Correct contaminating telluric absorption where needed, estimate the continuum, then compare selected lines with a model. Equivalent widths and spectrum synthesis offer complementary diagnostics. A solar benchmark tests the chain before interpretation.

Calibrated spectrum → line model

Abundance → uncertainty → review

Every inference preserves source and model provenance.
Go deeper · the mathematics

Equivalent width Wλ = ∫(1 − Fλ/Fc)dλ measures missing area relative to the continuum and has wavelength units. A(X) = log10(NX/NH) + 12. [X/H] = A(X)star − A(X)Sun on a compatible scale. [X/Fe] = [X/H] − [Fe/H].

Advanced · assumptions and scientific limits

VALD3 supplies atomic data with source provenance; it does not certify every line as suitable. Oscillator-strength grades, damping, blends, atmosphere choices and model applicability require review. Correlated gf or continuum errors do not shrink like independent noise. Propagate covariance and parameter sensitivity. IR measurements require holding-specific telluric validation before any claim of validated abundances.

Worked example / activity

Hypothetical values [X/H] = +0.20 dex and [Fe/H] = +0.10 dex give [X/Fe] = +0.10 dex. The X/H number ratio is 10⁰·² ≈ 1.58 times the reference solar ratio. These invented teaching inputs are not Codex measurements.

Common misconception

A line-list entry is not a quality grade. Averaging more lines cannot remove a shared systematic error; a solar agreement alone cannot validate compensating modeling errors.

Sources and review record

Last source check: . Independent scientific reviewer: pending. Accessibility reviewer: pending. This date records source checking, not independent approval.

Next: Exoplanets → · Back to modules ↑

Exoplanets

Discover planets and interpret host-star chemistry with care.

What you will learn

  • Distinguish transit and radial-velocity observations.
  • Explain the limits of host-star composition as a planetary clue.
Working experiment

Build a transit light curve

Change planet size, impact parameter and limb darkening; scrub the planet across the projected stellar disk.

Circular orbit geometry · linear limb-darkening quadrature

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Model, sources & teacher notes

Opaque spherical planet and spherical star, circular orbit, a/R★=10 and P=3 days fixed. Impact parameter b=(a/R★) cos i determines geometry. Linear intensity I(μ)=1−u(1−μ), with disk normalization π(1−u/3). Uniform disks use exact circle overlap; limb darkening uses 900 radial annuli. No spots, dilution, exposure averaging or transit timing variations. a/R★ and P imply a fixed stellar-density scale; no stellar mass/radius is inferred here. This is a teaching implementation, not batman or a fitted planet.

Teacher prompt: Try b>1+Rp/R★: no transit. At b=0,u=0 verify depth=(Rp/R★)². Increase u and inspect how the curve changes; radius and limb darkening can trade off.

Kreidberg 2015: transit geometry and radially symmetric limb darkening

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Working experiment

Watch a star’s reflex motion

The star, not the planet, supplies these shifted stellar lines. Phase is interactive; the orbit sketch is deliberately not to scale.

Circular two-body orbit · no eccentricity or stellar activity

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Model, sources & teacher notes

For e=0, K=(2πG/P)^(1/3) Mp sin i/(M★+Mp)^(2/3), v★=K sin(2π phase). Positive v is receding. Masses use the documented IAU nominal-GM/G conversion. Without inclination, RV constrains a mass function; Mp sin i is the usual small-Mp/M★ minimum-mass approximation. We retain Mp in the denominator. Doppler-shift readout is relativistic; the curve is nonrelativistic two-body motion. The linked spectral line width is illustrative and magnified for teaching, not an instrument line-spread function. No eccentricity, activity, blends or additional planets.

Teacher prompt: Set i=0: why is RV zero even for a massive planet? Double mass or change period, then compare the Doppler shift with the Light lesson.

NASA Exoplanet Archive: predicted observables and RV amplitude · IAU 2015 nominal solar and planetary constants (Prša et al. 2016) · NIST CODATA 2022 constants

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Start here

Transits measure changes in stellar brightness when a planet crosses the stellar disk. Radial velocities track periodic motion of the star through shifting spectral lines. Stellar abundances describe the host’s photosphere; they help frame planet-formation questions alongside planetary observations and models.

Starlight → planet crossing

A brightness dip → radius ratio

Uniform-disk approximation; geometry is not chemistry.
Go deeper · the mathematics

For a small opaque planet and a uniform stellar disk, transit depth δ ≈ (Rp/Rstar)². Real analyses include limb darkening and system geometry. Radial-velocity amplitude constrains a mass–inclination combination in a single-planet Keplerian model, given stellar mass and orbit.

Advanced · assumptions and scientific limits

Planet formation redistributes and differentiates material. A photospheric [X/Fe] ratio is not a direct measurement of a planet’s bulk composition, atmosphere or biosignatures. Stellar activity, stellar parameters, orbital geometry and detection selection all affect interpretation.

Worked example / activity

A hypothetical 1% transit depth implies Rp/Rstar ≈ 0.10 under the uniform-disk approximation. It does not determine the planet’s mass, mineralogy or habitability. Compare this geometric inference with the chemistry inferred in the previous lesson.

Common misconception

An element associated with life in a host star is not evidence of life on its planets. A stellar C/O ratio does not uniquely specify a planet’s rocks or atmosphere.

Sources and review record

Last source check: . Independent scientific reviewer: pending. Accessibility reviewer: pending. This date records source checking, not independent approval.

Next: Theoretical Atomic Laboratory → · Back to modules ↑

Theoretical Atomic Laboratory

Follow a transition’s provenance before trusting its strength.

What you will learn

  • Separate theoretical calculations from laboratory measurements.
  • Identify what validation and line grades establish.
Working experiment

Inspect the source behind a line

Choose an element and line, then compare the adopted record with retained source candidates. Unknown fields remain unknown.

Pinned canonical metadata · no prediction or grade promotion

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Model, sources & teacher notes

NIST level and line tables provide identities. The pinned Codex canonical_gf rows provide adopted log(gf), NIST accuracy grade and retained GES/VALD candidate columns. These historical candidates are not independent new external queries. An accuracy grade describes atomic-data uncertainty, not approval for a stellar analysis. NIST is an evaluated compilation; experimental/theoretical origins are not classified where the snapshot does not establish them. Missing H log(gf) and missing grades stay unknown, not zero. This explorer does not promote Theoretical Atomic Lab candidates.

Teacher prompt: Find a source difference for Na D₁, then select the ungraded line. Which claims can you make from a source value, an accuracy grade or missing provenance? Follow the actual pinned canonical reference.

NIST atomic spectroscopy: intensities and oscillator strengths

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Start here

A theoretical atomic calculation predicts properties from a model of the atom. A laboratory experiment measures a physical system. Evaluated databases may combine both. Always follow an oscillator strength back to its actual method and reference.

Experiment / theory → source

Evaluated data → line use → validation

A database entry does not make theory experimental.
Go deeper · the mathematics

Line lists often report log10(gf), where g is the lower-state statistical weight and f the absorption oscillator strength. Errors in gf affect inferred abundance; the relationship depends on line strength and the model. Gauge agreement or convergence is diagnostic evidence, not independent experimental validation.

Advanced · assumptions and scientific limits

An ungraded line can be explored without calling its abundance scale trusted. Compare consistent transition identities, air/vacuum scales, fine-structure components, uncertainty definitions and independent literature. Agreement between engines sharing the same inputs is not an independent atomic-data check. Codex research predictions and unfinished validation gates are not established laboratory results.

Worked example / activity

Open the Atomic Laboratory roadmap and the Frontier atlas. For a selected entry, separate availability, implementation status, applicable physical domain and independent validation. Missing evidence stays unknown; membership in a literature list is not a grade.

Common misconception

A theoretical oscillator strength does not become an experimental measurement because it appears in an evaluated database. A successful software run does not supply scientific sign-off.

Atomic Laboratory development and validation gates · Atomic & Molecular Model Atlas · Software and literature sources

Sources and review record

Last source check: . Independent scientific reviewer: pending. Accessibility reviewer: pending. This date records source checking, not independent approval.

Next: Learning Resources → · Back to modules ↑

Learning Resources

Practice the full journey and bring a guided activity to class.

What you will learn

  • Connect light, lines, stars, abundances and planets.
  • Support an inference with assumptions and provenance.
Working experiment

Try it: predict a photon’s energy

Tune the light, calculate E=hc/λ, enter your prediction in eV and check it. The result explains units and the calculation.

Worked interactive assessment · 1% answer tolerance

This experiment needs JavaScript. Read the assumptions and worked lesson below when interactive controls are unavailable.

Model not loaded; no simulated result is being asserted.

Make a prediction, then check it.

Model, sources & teacher notes

Use λ in meters, h=6.62607015×10⁻³⁴ J s and c=299792458 m/s, then divide joules by 1.602176634×10⁻¹⁹ J/eV. Approximate color is an aid, not calibrated colorimetry. The check accepts relative error ≤1%; this is a classroom scoring tolerance, not a physical uncertainty.

Teacher prompt: Ask for a prediction before calculating. At 500 nm expect approximately 2.480 eV. Correct arithmetic with wrong units does not earn full credit. Change to 650 nm and explain the direction before trying again. Link back to the atomic and Light experiments for transfer practice.

NIST CODATA 2022 constants

Source checked 2026-11-14. Independent scientific and accessibility review pending.

Start here

Begin with Light, explore hydrogen, then follow the Stellar Spectroscopy, Elemental Abundances and Exoplanets lessons. Use the Glossary for definitions and Methodology for the project’s documented practices. All lessons, interactives and downloads are freely accessible without an account or payment.

Light → atom → stellar spectrum

Abundance → planetary interpretation

Separate observations, assumptions and interpretation.
Go deeper · the mathematics

Classroom task: calculate the photon energy for a selected explorer transition, convert nm to m explicitly, and compare with the display. Change only the transition and explain why E and λ vary inversely. Record the selected states and vacuum convention with your answer.

Advanced · assumptions and scientific limits

Educator assessment: ask learners to label each claim as an observation, a modeling assumption or an interpretation. A detector flux is an observation; an LTE atmosphere is a modeling assumption; a planet-formation explanation is an interpretation. An abundance estimate depends on observations and modeling. Download the activity and record assumptions with every result.

Worked example / activity

Suggested 30-minute session: 5 minutes on wavelength, 10 on the hydrogen explorer, 10 tracing a spectrum-to-abundance inference, and 5 on why stellar chemistry alone cannot prove habitability. No prerequisite calculus is needed; the mathematics panels provide an extension.

Common misconception

A convincing visualization is not evidence that a model fits real stars. The explorer is an energy-conservation lesson, not a stellar synthesis engine.

Download classroom activity and answer guide (text) · Learning content roadmap

Sources and review record

Last source check: . Independent scientific reviewer: pending. Accessibility reviewer: pending. This date records source checking, not independent approval.

Next: Light → · Back to modules ↑

More ways to explore

Working lessons: light and color, prism/grating dispersion, resolution and Doppler shift; H/Na atomic transitions; a schematic stellar slab; EW and curve of growth; transit and stellar RV; atomic metadata; an interactive assessment. Scientific and accessibility review is pending.

Future extensions: validated stellar-atmosphere grids, Planck continuum, explicit multi-line blends, rotational/macroturbulent broadening and fitted observations. The current stellar control panel is an explicitly schematic absorbing slab, not a grid prediction.

Future research integrations: independently validated theoretical Atomic Laboratory candidates and advanced 3D NLTE exercises. Current metadata is pinned to cited canonical records; unknown and ungraded quantities remain explicit.

Lessons, GUIs, classroom exercises and downloads remain free without subscriptions or registration. Illustrations are original code-drawn diagrams. Proposed reuse license: CC BY 4.0 for original educational text and figures, subject to owner approval; no new license grant is made by this draft. Linked sources retain their own terms.

Project roadmap and evidence · Project bibliography · Suggest an educational correction